Features: 1. With SW-18010P sensitive normally open type vibration sensor. 2. The vibration sensor can be connected to the detection position. The line length has no effect on the sensitivity within 5 meters. 3. Directly with relays to drive high current equipment. 4. With 4 positioning holes. 5. Use: Vibration trigger alarm, can be directly used in various high current, high voltage applications. Instructions for use: When the vibration sensor has vibration induction, the relay is closed, the green light is on, that is, the common end is connected to the normally open end; when no vibration is detected, the relay is turned off, the green light is off, and the relay is turned into the common end and the normally closed end. Specification: Type: 5V, 12V (optional) Supply voltage: 5VDC 12DC (depending on your order) Current: greater than 100mA Load: 250V 10A AC or 30V 10A DC Weight: approx. 19g Package list: 1 * Module Note: For the description of the high-level and low-level trigger modes, please do not understand the friends who do not understand: High-level triggering refers to the triggering mode of voltage between the signal input terminal and the ground, which can be understood as a way to trigger the short circuit of the signal input terminal and the VCC positive terminal; Low-level triggering refers to the triggering mode of the voltage between the signal input terminal and ground is OV, which can be understood as a way to trigger the short circuit between the signal input terminal and the GND negative terminal. 1、With SW-18010P sensitive normally open type vibration sensor 2、The vibration sensor can be connected to the detection position. The line length has no effect on the sensitivity within 5 meters 3、Directly with relays to drive high current equipme 4、With 4 positioning holes 5、Use: Vibration trigger alarm, can be directly used in various high current, high voltage applications