Features: 1.High Speed Data Transmission: Using PCI?Express. Interface through VL805 master bridge four USB3.0 interface high speed data transmission interface 2.Reduce the Loss of Rectifier: Synchronous rectifier uses a power MOSFET with very low on state resistance to replace the rectifier diode, so it can reduce the loss of the rectifier, improve the efficiency of the DC/DC converter, and meet the needs of low voltage and high current rectifier 3.Function: Low loss alloy powder die casting, low impedance, no lead end, small parasitic capacitance, precise product, durable rust prevention, small volume, large current 4.Equipped with Fuse: Each 19p 20p output port is equipped with a self recovery fuse, when external short circuit fault access to the USB device, the short circuit current of high temperature will make internal fuse melts instantly generate high block open state, thereby limiting short circuit current, when the fault disappear, temperature drop, the flux will automatically revert to the original low resistance conducting state 5.High Performance: High gold plating, oxidation resistance, good conductivity, wear resistance specification:Item Type: Expansion Cards Material: PCB Model: PH62 Type: Desktop PCIE to USB3 0 Expansion Card Input Interface: PCl-E X1 Compatible with X4/X8/X16 Compatibility: USB2 0, USB1.1 Compliance: PCI EXPRESS 2.0 Basic Compliance: Extensible Host Controller Interface (XHCI) Revision 1.0 Compatibility: For Windows Xp, for Vista, for 7 (Driver Required), for Windows 8, for 10 System Comes with Driver PackageList:1 x ExpansionCards 1 x Baffle 1 xScrew NotePlease note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.