Features 1、Adopting all‑metal porous bearing, with high wear resistance, strong load‑bearing capacity, effectively protecting the gearbox motor body. 2、The motor wire is made of pure copper, with good conductivity, and the power of the geared motor is instantly increased by 30%. 3、The motor spindle is made of high‑hardness steel, which has good toughness and impact resistance, which can increase the service life of bearings and gear motors. 4、The gear bearing is a micro‑reduction type, which can reduce the speed of the motor, and can run with low noise and high torsion. 5、Commonly used in vending equipment, panning cameras, slot machines, currency detectors, coin return equipment, automatic doors, peritoneal machines, toy motors, etc. Specification Item Type: Gear Motor Bearing Type: Porous bearing Gear Material: Metal Motor Wire Material: Copper wire Spindle Material: Steel Radial Force: ≤ 1 kgf Axial Force: ≤ 0.7 kgf Spindle Maximum Bearing Capacity: ≤ 5 kgf Reduction Ratio: 1: 9 No-Load Speed: 888RPM Load Speed: 700RPM Load Torsion: 0.2Kgf/cm Gearbox Size (D x L): Approx. 37 x 22.5mm / 1.5 x 0.9in (manual measurement error ±1mm) Output Shaft Size (D x L): Approx. 6 x 14mm / 0.2 x 0.6in(manual measurement error ±1mm) Motor Size (D x L): Approx. 36 x 33.3mm / 1.4 x 1.3in(manual measurement error ±1mm) Mounting Hole Size: M3 Application: Automatic vending equipment, panning cameras, slot machines, currency detectors, coin return equipment, automatic doors, peritoneal machines, toy motors, etc. Package List 1 x Gear Motor