{infomodule} Package Include1 x Double-head sheet metal nibbler1 x Plastic Handle1 x Replacement cutting head1 x Wrench1 x Cutter Arbor1 x BoxFeatures:1. Perfect for car repair and house maintenance like metal roof cutting, HVAC vent pipe and other metal sheets2. Universal cutting accessories for round and Straight cutting, available for different cutting shapes.3. Cutting speed is 2m per minute with 3000rpm.4. Cutter head can be positioned 360 degrees.5. No any burrs at the cutting edges.6. No distortion to material.7. Safe to touch, easy to work with.8. Powered by a Hand Drill - no additional power source needed.9. An iron box for easy store and carry.Specifications:1. Model: B532442. Material: Alloy3. Color: Blue/Red/Gold4. Type: Double metal sheet cutter5. Allow cutting thicknessOrdinary iron plate: 1.8mmStainless steel plate: 1.2mmCopper, aluminum plate: 2mmPlastic plywood: 2mmThe operating requirements and accessories replacement method:1. Digging of the cutter head is especially important for cutting aluminum plates.2. Open the drill first and then cut it. At the end, exit the drill and turn off the drill.3. When cutting, the incision of the cutter bar must be perpendicular to the workpiece to be cut to prevent the cutter from breaking.4. Arbor replacement: Open the cover, remove the lock nut, loosen the set screw, use the pliers to pull out the holder, reinstall the holder, and tighten the screw.5. Tool holder replacement: Unscrew the compression cap counterclockwise and replace with a new one.