Hang the hook on the stem or branch of the plant to prevent it from tipping or falling. As the plant grows, maintain a slight tension to maintain a stable effect. It can be hooked onto the stems of vines and melons and reused in the . The 1mm transparent line will not destroy the light distribution. It is widely used in greenhouses, hydroponics, floriculture, agriculture and grape cultivation. support through the tensioning mechanism and keep a proper distance from the plant Supports up to 24 pounds; Stainless steel spring; Maximum extension length: 55 inch Hooks support Hang it above the plant to support the stem Gently on the plant, the long rope is 60 inches long Comes with a plastic stopper to fix to the required length It also fully meets the requirements of adjusting the hood to different light sources as plants grow. support through the tensioning mechanism and keep a proper distance from the plant 1. Hang the hook on the stem or branch of the plant to prevent the plant from falling or tilting. When the plant grows tall, the hook's pull line will transfer the plant's height and slowly retract to continue to gently hook the plant. Yes, you can also use a plastic plug to keep it at a static length of 1.4 meters, the maximum dimension of the cable. In order to that the plant grows up gently and enhance the photosynthesis of the plant; or use a plastic plug to keep the pull cord at the corresponding height. 2. When the hook acts on the plant, it gently hooks the stems of melons and vines. When the plants are and harvested, the hook can be put and used repeatedly; 3. The use of 1mm thick transparent cable does not have any impact on the lighting of plants; 4. This product is a professional planting tool. This yoyo hook is not a load-bearing hook for ! Colour: yellow Material: plastic Size: Length: 14cm Package Contents: 10 * Climbing hook Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.