200mm Shower Door Handles Replacement, made from stainless steel. The handles are easy to install and held together with two grub screws. With a polished finish, this handle not only looks great, it feels great and is durable. Made from stainless steel, ensuring resistance to rust, which is important in wet environments. Included: - 200mm Shower Door Handles - Allen Key for Installation Shower Door Handle Information: - Works for Glass Thickness: 2mm to 12mm - Minimum Glass Hole Diameter Required: 12mm / 1.2cm - Handle Style: Rectangle back-to-back design, separable with a grub screw (Allen key included) - Distance Between Centre Points: 200mm / 20cm (7.87 inches or 7 7/8 inch) (from glass hole centre to glass hole centre) - Material: Stainless Steel Shower doors have pre-drilled holes for handle installation. The 200mm shower door handle is an angular, two-sided vertical handle with a 20-centimeter distance between the fixing points. It is important to match the distance between the holes in your shower door with the fixing bolt distance of this replacement handle. This handle has a 200mm distance between fixing bolts. The hole diameter should meet the minimum requirement of 1.2cm. Additionally, the tempered glass thickness should be between 2mm and 12mm to ensure proper fit. Shower doors can be framed or frameless, pivoting or sliding. Handle length and finishes vary. Selecting the correct handle ensures ease of use when opening and closing the shower door and enhances the overall appearance of the shower or tub enclosure. A horizontal handle typically spans the width of a sliding shower door, while a vertical handle or knob is commonly used on pivoting doors. This handle is available in multiple lengths: - 170mm - 175mm - 256mm Frequently Asked Questions: Shower Door Replacement Handle Q: How will I know if this will fit my shower door? A: If your shower door has two 12mm holes, a hole-to-hole distance of 20cm, and the door thickness is between 2mm and 12mm, this handle will fit. Installation Instructions: Attaching the stainless steel shower door handle is straightforward. - The handle has two grub screw access points located on the inner top and bottom of each half. - Insert the included Allen key into the access point to loosen or tighten the grub screws. - Position the handle into the pre-drilled holes in the glass door. - Use the Allen key to secure the grub screws and fasten the handle in place. - During installation, ensure the Allen key does not contact the glass surface directly to avoid scratches. We offer shower door replacement handles in various designs.