Features:Made of high quality material, durable in use.Compact structure, light weight, easy to store.Adjustable speed, safe and reliable operation.It has the advantages of stable rotating speed, low noise and energy saving.Suitable for school teaching, pottery bar or home use, meet the majority of professional, amateur ceramic enthusiasts.Specification:Material: Aluminum Alloy Weight: 917g/32.3oz Rated Current: 1ASpeed Control Mode: knob infinitely variable speedRated Voltage: 5V-9VRotary Speed: 0-2000RPMRotary Wheel Diameter: 4.5cm/1.8inchRotary Wheel Thickness: 0.7cm/0.3inchMachine Body Size: Approx. 16 x 11 x 9cm/6.3 x 4.3 x 3.5inchPackage List:1 x Ceramic MachineNote:Operation note: 1. Roll the clay into a cylinder, fix it in the center of the turntable and press it. 2. Use the ceramic tool alignment center to slowly open the hole, then slightly expand outward a bit. 3. Use ceramic tools to shape and trim the construction of your work. 4. Keep the rotating disc at constant speed and dry the work surface with a spray gun/ hot air gun. 5. Use tools from peak to bottom to modify, and finally fix the bottom 6. After the work is completed, the work can be cut off with a scraper or a knife-edge tool Suggestions: 1. Get smaller pieces of mud 2. Don't rotate too fast and slow at a slower speed. 3. When shaping, you can stretch it out a bit thicker and then thin it out slowly.4. Use clay tools to assist molding, less water. .Note:Please note that the screw holes on the product will be sent randomly, and make sure you will not mind before ordering.