Mini 2in1 LED Fill Light + Speedlite Bi-Color Adjustable 2500-6500K for Most Camera

38,49 €
+ 9,91 € Αποστολή

Mini 2in1 LED Fill Light + Speedlite Bi-Color Adjustable 2500-6500K for Most Camera

  • Μάρκα: Unbranded
Πωλήθηκε από:

Mini 2in1 LED Fill Light + Speedlite Bi-Color Adjustable 2500-6500K for Most Camera

  • Μάρκα: Unbranded
Αρχική τιμή: 45,82 €
Τιμή: 38,49 €
Κερδίζετε: 7,33 € (15%)
Πωλήθηκε από:
38,49 €
+ 9,91 € Αποστολή

Σε απόθεμα

Δεχόμαστε τους ακόλουθους τρόπους πληρωμής

Περιγραφή

It's a fill light, 2500-6500K and brightness both adjustable, built-in diffuser, Also a mini speedlite, around 6500K. Support to flash when by smartphone. Charge by type-C cable, compatible with most mirrorless cameras. Instructions: 1. Long the power button for more than 3 seconds to turn on or off the lights. If not used for a long time, please turn off the power, avoid light, and store in a dry place. 2. It has two lighting modes: Bi-Color fill light mode, Flash mode. After turning on, short the power button to switch between two modes. Bi-Color fill light mode: 1. Long the power button to start. If both brightness and color temperature lights are on with the front LED panel, it's in Bi-color fill light mode. Otherwise, switch by short pressing the power button. 2. Adjust lighting color temperature and brightness for photos or videos. Use it handheld, attach to the camera's hot shoe, or use a cold shoe device. Flash mode for camera: 1. After starting, if only the brightness light is on, it's in flash mode. Otherwise, switch by short pressing the power button. 2. Test the flash when the button lights up red and the capacitor is fully . Face the light away from you. 3. Install onto the camera's hot shoe, lock the knob, and long the power button to activate the flash. Set the camera to M mode for accurate exposure. 4. Flash does not support automatic exposure (TTL). Sync with shutter to 1/250. Adjust power using the D button. 5. Designed for most cameras. Some may need additional settings. Flash mode for Smartphone: 1. it's in flash mode. Long the photography button and turn on your phone's b1uet00th. Scan for " and pair. 2. Blue light flashing means searching. Steady blue light indicates successful connection. 3. Open camera mode, aim, the photography button to flash and take a photo. 4. Use LED lights for . Avoid blocking the light panel. The photography button can also control video recording. 5. Long the photography button to disconnect from your phone. Color:Black Material:ABS Package Contents: 1 * 2 in 1 flashlight 1 * charging cable 1 * Instructions in Chinese and English Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Fruugo ID: 415645988-877381144
  • EAN: 6903379912193

Παράδοση & Επιστροφές

Αποστέλλεται σε 3 μέρες

  • STANDARD: 9,91 € - Παράδοση μεταξύ Τρί 14 Οκτωβρίου 2025–Τρί 21 Οκτωβρίου 2025

Αποστέλλεται από Κίνα.

Κάνουμε ό,τι καλύτερο μπορούμε για να εξασφαλίσουμε ότι τα προϊόντα που παραγγέλνετε αποστέλλονται σε εσάς πλήρως και σύμφωνα με τις προδιαγραφές σας. Παρ' όλα αυτά, αν παραλάβετε μία ελλιπή παραγγελία ή προϊόντα διαφορετικά από αυτά που παραγγείλατε ή αν υπάρχει κάποιος άλλος λόγος που δεν είστε ικανοποιημένοι με την παραγγελία, μπορείτε να την επιστρέψετε ολόκληρη ή κάποια προϊόντα από αυτή και να λάβετε πλήρη επιστροφή χρημάτων για τα προϊόντα. Προβολή πλήρους πολιτικής επιστροφών