Feature: 1.Practical : This product can be easily removed with this product. Gel texture can be used for vertical or inclined surfaces. 2.Quick cleaning : Can make cleaning more interesting and easy 3.Easy and speed: Easy to use and fast 4.Uses : Mold cleaning Description: Ingredients: Sodium hypochlorite, sodium hydroxide, etc. Color: As shown Capacity: 20/100/120g Products include: 1 * mold remover Instructions for use: 1. Wipe the dust and moisture from the mold surface with a dry towel. 2. Open the product cover and squeezes it about 3 mm thick on the mold. Hold for 3 to 5 hours, then wipe with water. 3. Confirm the sterilization effect, if not completely removed, please repeat. Precautions for use: 1. Do not use outside of the intended use. 2. Keep ventilation when using. Rubber gloves are recommended. 3. Cover the lid after use and keep out of reaching of children. 4. If accidentally touching the skin or enter your eyes, rinse immediately with water. 5. If you accidentally eat, please drink water and vomit immediately and seek medicals attention. 6. Fading will appear on the clothes, please be careful. 7. The part that is discolored or stained with metal (yellow silica gel) is invalid. 8. According to the degree of pollution, the sterilization effect will be different. 9. If the solutions freezes or is near a heat source, the solutions will become thinner. Include: 1 X Mold Remover