Feature 1 Relay Function: Support the relay function, when the relay status, the PC can view the data of each channel, and can also send data to each channel 2 Easily And Quickly Analyze And Debug: The PC terminal can easily and quickly analyze and debug the communication between CAN1 equipment and CAN2, which is a CAN development tool for R and D engineers 3 One Key Automatic Detection: CAN bus analyzer support one key automatic detection, channel selection, custom detection range 4 Support Conventional Baud Configuration And Customization: The device supports conventional baud configuration and customization. Unconventional baud rates can be calculated through the baud rate calculation software, and then fill in the calculation results in the software 5 Support Secondary Development: Compatible with for ZLG, for Trythink, for New Energy software, support secondary developmentItem Type: CAN Bus AnalyzerMaterial: ABS shellChannel: 2Isolation: DC2500AC1700Power Supply: USBUSB Speed: USB2.0 full speed 12M/SSoftware Support: Compatible with for ZLG, for Trythink, for New EnergySecondary Development: SupportCAN Baud Rate: 5K-1M/customCAN Standard: Support CAN2.0A and CAN2.0B protocol at the same time, conform to ISORelay Transparent Transmission: 2A(not supported); 2C (supported)Matching Resistance: Built in 120ohms (flexible configuration)Interface Form: Screw terminal Package List1 x CAN Bus Analyzer1 x USB Cable1 x ScrewdriverNoteWorking Temperature: 40~+85.