Features: 1.Front Panel USB 3.1 Hub: Featuring a highly integrated application specific design, there are 1 uplink port and 4 downstream ports, both supporting 10Gbps USB 3.1 Gen 2 operation. 2.Multiple Transaction Converters: Features multiple transaction translators to provide higher bandwidth and performance when using multiple full speed devices simultaneously. 3.Downstream Ports: Downstream ports can support any combination of SuperSpeed Plus (10Gbps), SuperSpeed (5Gbps), High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps) devices. 4.Operating System: Runs under for Windows, for OS X and various for Linux kernels, no additional drivers are required. 5.Wide Compatible: The front panel docking hub is suitable for standalone USB hubs, port replicators, desktop PC front panels, motherboard onboard hubs, etc. specification:Item Type: Front Panel USB 3.1 Hub Material: Aluminum Alloy Transmission Protocol: Usb 3.1 Gen 2 Media Interface: 2 x Usb3.1 Type C, 2 x Usb3.1 Type A Transfer Rate: 10gbps (superspeed Plus) Main Universal Serial Bus 3.1 Compliant, Superspeed Plus Usb (usb 3.1 Gen 2) Compliant with Usb Type C 1.0 Rev 1.2 Supports Simultaneous Operation of Any Combination of Superspeed Plus, Superspeed, High Speed, Full Speed, and Low Speed Devices Supports Usb Power Saving Features Such As Link Power Management, Ux State, Selective Suspend and Functional Suspend Internal Usb Phy Using Advanced Cmos Process for Low Power Consumption Supports Any Combination of Single or Combined Mode Overcurrent for All Ports 3.3v and 1.05v Inputs Required Supports Usb Battery Charging s V1.2 (sdp, for Cdp, Dcp) Support for Vendor Specific Charging Modes Support YD/T 1591-2009 Supports Independent Charging when the System is Suspended, Powered Off, or Disconnected Any Combination of Dfps Can Be Configured to Support Usb Battery Charging Operating System: Runs Under for Windows, for Os X and Various for Linux Kernels Without Additional Drivers PackageList:1 x FrontPanelUSB3.1Hub 1x PowerCord 1 x Data Line