New Drill Bit Locator Hole Drill Homing Drill Dowel Jig Wood Drilling Tool Template Guide Tool Drill Bit Locator Jig Woodworking ToolBullet Points:1, For Easy Drilling: The Wood Drilling Locator is designed to make drilling in wood easier, simpler and more accurate. Using 1/4 inch hexagonal shaft, it can be used with cordless and corded electric drills and impact controllers.2, used in multiple directions: the fence can be connected to any of the 4 sides square base. In addition, the fence can be used in multiple directions. It can also be used as a plate edge.3, with full accessories: wrench chuck, tapered depth control shaft and stop ring, spring return, double-sided drill chuck, built-in V-groove, alignment and adjustable fence.4, our woodworking bit positioner has a small capacity of 1 inch, but if you remove it and turn it upside down, you can install a little up to 2 inches wide es. The V-groove on the base can easily drill the center of logs such as round pins.5, Built-in Allen tip: There are two pins inside, which can be stored on the boat when not in use. During use, they are screwed into the bottom of the base and can be tightened using one of the column caps, which has a built-in Allen terminal. Specification:Material: Alloy Steel Color: Red Weight: About 700 grams Packing List:Drilling Locator *1 (Excluding Electric Drill and Drill Bit)Note:How to drill a pocket hole:1. Adjust the drilling height according to the thickness of the wood.2. Tighten the clamp to fix the Homing Drill on the wood.3. Place the step drill bit into the pilot hole.4. Turn on the electric drill and set it to the specified speed of 500-1500 RPM.5. Before drilling the middle step drill bit for wood, you should drill slowly to improve the accuracy. Other: Do not touch the wood with the drill bit before turning on the drill. Due to the lighting effects and shooting angles, there is a color difference in the product, please understand. Due to manual measurement, there is a tolerance in the size of the product.