Usage Tips:["Description:\n\nMade of Marine Grade 316 Stainless Steel, durable, for tough and corrosion resistant.\n\nA special bit for key to remove the screws on the back wall of coffee machines.\n\nFit for / Krups / Franke / AEG / Orchestro / Siciliana / Toscana machines.\n\nThe for key ring moves freely and immediately applicable or can easily be removed so that you can use a regular driver handle for access in the tightest places.\n\nPlease beware that the tool does not fit the 5.8x4.8mm oval for head bolts of drip coffee makers.\n\nSpecification:\n\nMaterial: 316 Stainless Steel\n\nfor Key Length: Approx. 61mm / 2.4inch\n\nfor Key Width(Max*Min): Approx. 7*6mm / 0.28*0.24inch\n\nColor: Silver\n\nThe bit will fit the proprietary oval for head security screws in the following machines:\n\nFor : A1, A5, A7, A9, C5, C50, C55, C65, C70, C75, C9, C90, D6, E5, E8, E9, E10, E25, E30, E40, E45, E50, E55, E6, E60, E65, E70, E74, E75, E80, E85, ENA3, ENA4, ENA5, ENA7, ENA9, ENA Micro 1, ENA Micro 5, ENA Micro 8, ENA Micro 9, ENA Micro 90, ENA Micro Easy, F5, F50, F60, F70, F90, F7, F9, F900, Giga 5, Giga X3, Giga X7, Giga X8, Giga X9, XF50, XF70, S50, S55, S70, S75, S85, S90, S95, S7, S8, S9, J5, J6, J9, Z5*, Z6*, Z7*, Z8*, Z9*, X5*, X6*, X7, X9, X30, X70, X90, X95, Ultra, Cappuccinatore, M30, Scala, Scala Vario, 201, 300, 401, 500, 601, 801, 2000, 3000, 4000, 5000, 6000\n\nPackage Includes:\n\n1 Piece Coffee Machine Repair Tool for Key\n\n6 Pieces Rubber Gasket\n\nNote:\n\nPlease allow a slight difference between the size above and the actual item due to manual measurement."]