The cable stripper is used with RG58/59/62/6/3v2v/4c/5c and 2 blade ; Fully adjustable and replaceable blade; It is equipped with a hexagonal tool to adjust the depth of the v-shaped , rotate it clockwise for 3 to 7 circles, at one time, and retain the inner core.Crimping tool 3-in-1 is used with -6, -59, -58, etc. Compression distance: 20.3mm, extrusion fixture adopts high standard crimping die. Press accurately, and it is not easy to damage the F head.High-quality f connector is suitable for rg6 coaxial cable: it provides professional and safe connection for rg6 coaxial cable. Indoor anti-corrosion platingThe kit is a solution for DIY to use coaxial cable termination tools for tool installation in the industry. For example, install satellite TV/CCTV, mobile cable TV and cable modem, or for new houses.After adjusting the cable cutting depth, it is easy to strip the cable: the adjustable stripper can rotate and adjust head into four types of coaxial cables.F-Type Compression Crimping Tool:Size: 5. 5InchCompressed Distance: 0. 8InchCompatible: RG6 (5C), RG59 (4C)Essential heavy duty crimping tool for fitting snap-seal and F type connectors Coaxial Cable Cutter Tool:Length: 4x1x0. 7Inch Compatible: -58, -59, -62 ; Double blades, coax cable stripperHow To Use The Crimper1.Insert the plunger into the tool's holder and then Insert the stripped cable into the connector and make the cable is inserted to .2. Place the connector with cable into the tool's holder3. Squeeze handles4. Remove the crimped connector from the tool.How To Use The Coax Cable Stripper1. Put the cable into connect hole2. Press down the handle3. Rotate the tool along clockwise direction until the cable of4. Take out the cableColour:As ShownMaterial:MetalPackage Contents:1 x Crimper1 x Coax Cable Stripper15 x F Connectors for rg6 Coaxial CableOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.