Primarily used for bonding various dental orthodontic accessories. Easy to use with minimal waste and capable of independent operation. Offers high clinical bond strength for efficient and convenient use. A complete accessory kit featuring a new-generation enamel adhesive resin. Two different set sizes are available to choose from. Condition: New. Item Type: Orthodontic Dental Adhesive. Optional Type: Large Set, Small Set. Material: Plastic. Service Life: 18 Months. Storage Condition: Keep below 25 degrees (do not freeze). Suitable for all kinds of dental orthodontic attachment adhesion. Main Technical Performance Index: Curing time not more than 3000 seconds, adhesive shear strength MPa greater than 17.2. Usage: Tooth preparation involves cleaning the enamel surface to remove dirt, rinsing thoroughly with water, isolating the teeth, and blow-drying the surface with an oil-free and moisture-free air gun. Acid-etch the tooth surface by applying the etching agent for 50-60 seconds, then rinse thoroughly with water and blow dry; the surface should appear chalky. Apply Primer by brushing a thin layer of liquid onto the etched tooth surface and the bonding surface of the brackets. For Bonding, apply a small amount of paste to the adhesive surface of the bracket. Immediately attach the bracket to the tooth surface. Adjust the bracket position within 20 seconds and press slightly for 5-10 seconds to prevent sliding. Remove excess liquid and paste after 40-60 seconds. Orthodontic operation can be performed after curing for 5 minutes. Package List: 3 x Paste 3.5g, 1 x Etching Agent 2.5ml, 1 x Liquid Agent 8ml, 20 x Brush Head, 1 x Needles, 3 x Mixing Pen. .