Features 1、[Oscilloscope Mode] Waveform refresh rate up to 10000wfms/s. 2 way inputs, bandwidth of up to 200MHZ, providing better signal reception. Real time sampling rate is 1GSa/s, the record length can achieve 8k points. 2、[Multimeter Mode] 4 1/2 bits of true RMS. Supports voltage, current, resistance, capacitance, diode, on off test. Maximum input voltage is 750V AC and 1000V DC. 3、[Multi Function] Equipped with automatic range function, convenient for testing and debugging, with reading and waiting function, relative measurement function, more practical. 4、[High Performance] The signal source adopts a 25MHz output frequency, 1GS/s sampling rate, 14 bit vertical resolution, supports 1MΩ and 50Ω outputs. 5、[USB Type C Interface] Not only supports mobile power supply, but also supports adapter charging and top grade computer connection. Computers can read saved images or CSV waveforms, which is very useful for viewing and analyzing waveforms or sharing waveform data in the future. Specification Item Type: Oscilloscope Multimeter Material: ABS Oscilloscope: Model: HDS2202S Bandwidth: 200MHz Channel: Dual channel, single channel signal source Real Time Sampling Rate: 1GSa/s (single channel), 1GMSa/s (dual channel) Sampling Mode: Normal, peak sampling Storage Depth: 8K Display: 3.5 inch LCD Waveform Refresh Rate: 10000 wfrms/s Input Coupling: DC, AC, grounding Input Impedance: 1MΩ±2%, parallel to 16pF±10pF Probe Attenuation Coefficient: 1X, 10X, 100X, 1000X Bandwidth Limit: 20MHz Time Base Range: 5ns/div~500s/div, in steps of 1-2-5 Vertical Sensitivity: 10mV/div~10V/div Vertical Resolution: 8bit Low Frequency Response(-3db): ≤10Hz at BNC Rise Time (Typical on BNC): ≤5ns Trigger Type: Edge trigger Trigger Method: Automatic, normal, single time Trigger Level: ±4 divisions from the center of the display screen Automatic Measurement: Frequency, period, amplitude, maximum, minimum, average, peak to peak Communication Interface: USB TYPE C Power Supply: Polymer 18650 x 2 4400mAh (built in) Multimeter Partial Performance Parameters: Digital Display: 4½ (maximum display 20000) Input Impedance: 10MΩ Diode: 0-2V Range and Accuracy: 200.00mV, ±(0.5%+5 dig) 2.0000V 20.000V 200.00V, ±(0.3%+3 dig) 1000.0V, ±(0.5%+2 dig) 200.00mV 2.0000V 20.000V 200.00V, ±(0.8%+5 dig) 750.00V, ±(1%+5 dig) DC Current: 20.000mA 200.00mA, ±(1%+5 dig) 10.000A, ±(2.5%+2 dig) AC Current: 20.000mA 200.00mA, ±(1%+5 dig) 10.000A, ±(2.8%+5 dig) Resistance (Ω): 200.00Ω 2.0000kΩ 20.000kΩ 200.00kΩ 2.0000MΩ, ±(0.8%+3 dig) 20.000MΩ, ±(1%+3 dig) 100.00MΩ, ±(3%+3 dig) Capacitance (F): 20.000nF 200.00nF 2.0000μF 20.000μF 200.00μF 2.0000mF, ±(3.0%+10 dig) Frequency Response (Hz): (40-1000) Hz Signal Source Partial Performance Parameters: Waveform Output Frequency: Sine Wave: 0.1Hz~25MHz Square Wave: 0.1Hz~5MHz Sawtooth Wave: 0.1Hz~1MHz Any Wave: 0.1Hz~5MHz Sampling Rate: 125MS/s Number of Channel: 1 Output Amplitude: 20mVpp-5Vpp (high resistance), 10mVpp-2.5Vpp (50Ω) Waveform Length: 8K Vertical Resolution: 14bits Output Impedance: 50Ω Package List 1 x Oscilloscope Multimeter 2 x BNC to Crocodile clip 1 x USB TYPE C Cable 2 x Test Pen 1 x Probe Pen 1 x Bag 1 x Calibration Pen 4 x Plastic Ring 1 x Plastic Cover 1 x Hollow Iron Needle 1 x Instruction Manual