REVOLVING TREE STAND - The can rotate back and forth automatically, this advanced automatic two way rotation can avoid twisting light cord. uses 3VDC power, it is electrically safe and easy to assemble. CAUTION: 1) Tree must be installed upright and balanced at all times in order for stand to function properly. 2) Make sure can rotate properly for a few minutes before decorating. 3) will not get obstructed by the light cord, so the can work smoothly. 4) While is working, keep loose objects away from . 5) Pull the adaptor out from AC outlet if doesn't work. 6) For indoor use only. ASSEMBLING INSTRUCTIONS: 1) Press 4 legs into the channel at the bottom of the stand. 2) Place into the top hole of the stand, and turn 3 triangle screw manually to hold the trunk of tree tightly. Please keep upright so that the can work smoothly. 3) The light cord must be mounted around the trunk, and then connected with AC extension cord or wall outlet.( may get obstructed by the light cord if the plug of light cord comes from the edge of tree branch.) 4) The DC plug of adaptor will be plugged into DC jack in switch box, turn on switch, the will start working. TROUBLESHOOTING: 1) Adjust tree to be upright. 2) Turn power switch off and on again. 3) Make sure the adaptor DC plug is properly connected with switch box and the adaptor AC plug is properly connected with wall outlet. 4) Make sure tree branches are not hitting any obstacles and not obstructed by the light cord. 5) Try gently revolving tree branch manually left and right a few times. Plug Type:US Plug, it applies to Canada, India, Mexico, Thailand, Taiwan, the , the Philippines and so on. Voltage:AC110V Colour:Green Material:Plastic+Alloy Steel Package Contents: 1 * Rotating Tree Stand Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.