Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L ) 26s

139,00 €
+ 7,49 € Αποστολή

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L ) 26s

  • Μάρκα: Unbranded
Πωλήθηκε από:

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L ) 26s

  • Μάρκα: Unbranded

139,00 €

Αποθήκευση 130,00 € (48%)

Συνιστώμενη τιμή

269,00 €
Σε απόθεμα
+ 7,49 € Αποστολή
Πωλήθηκε από:

139,00 €

Αποθήκευση 130,00 € (48%)

Συνιστώμενη τιμή

269,00 €
Σε απόθεμα
+ 7,49 € Αποστολή

Δεχόμαστε τους ακόλουθους τρόπους πληρωμής

Περιγραφή

Condition: 100% Brand New <br>Item Type: Cylinder <br>Material: Aluminum Alloy <br>Color: As Pictures Shown <br>Optional Type: ACK63-90R, ACK63-90L <br> <br>Inner Diameter: Approx. 63mm / 2.5in <br>Piston Rod Outer Diameter: Approx. 20mm / 0.8in <br>Action Type: Double Action <br>Working Medium: Air (filtered by a Filter Screen Above 40μm) <br>Operating Pressure Range: Approx. 0.15-1.0MPa (22-145psi) <br>Guaranteed Pressure Resistance: 1.5MPa (215psi) <br>Working Temperature (℃): -20-80 <br>Operating Speed Range: Approx. 50-200mm/s 2-7.9in/s <br>Travel Tolerance Range: 1.0 <br>Rotation Angle Tolerance Range: Approx. ±1.5° <br>Buffer Type: None <br>Take over Caliber: PT1/8 <br>Installation and Use <br>1. When the cylinder clamps the workpiece, it must be performed within the clamping stroke, and the clamping operation cannot be performed within the rotation stroke. <br>2. The clamping plane must be perpendicular to the cylinder axis. After the workpiece is clamped, please do not move the workpiece. <br>3. Before piping the cylinder, the debris in the pipe must be removed to prevent debris from entering the cylinder. <br>4. The medium used in the cylinder should be filtered by a filter element above 40μm before use. <br>5. When the cylinder is removed and not used for a long time, pay attention to rust prevention on the surface, add dust blocking caps to the intake and exhaust ports, and apply rust prevention oil to the end of the piston rod.<br>1、This is a double?acting rotary clamping corner press cylinder with an inner diameter of 63mm and the maximum working pressure reaches 1.0MPa the maximum operating speed can reach 200mm/s. <br>2、The cylinder block is made of aluminum alloy, with high density and high strength, supporting long time and high load work. <br>3、The inner wall of the cylinder mirror process, the surface is hard oxidized to extend the service life of the cylinder. <br>4、The hard protective layer is resistant to wear and corrosion and can be used in harsh working environments. <br>5、The cylinder is small in size and has simple structrue, you can carry it easily and install it in a few minutes.1 x Cylinder Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.
  • Fruugo ID: 428219790-899763782
  • EAN: 6471506039599

Πληροφορίες για την ασφάλεια του προϊόντος

Δείτε τις πληροφορίες για την ασφάλεια του προϊόντος που περιγράφονται παρακάτω

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Ετικέτες ασφάλειας προϊόντων

CE Mark
Προειδοποιήσεις για την ασφάλεια: Not suitable for children under 36 months
Συστατικά: Others

Παράδοση & Επιστροφές

Αποστέλλεται σε 24 ώρες

  • STANDARD: 7,49 € - Παράδοση μεταξύ Πέμ 20 Νοεμβρίου 2025–Παρ 28 Νοεμβρίου 2025

Αποστέλλεται από Κίνα.

Κάνουμε ό,τι καλύτερο μπορούμε για να εξασφαλίσουμε ότι τα προϊόντα που παραγγέλνετε αποστέλλονται σε εσάς πλήρως και σύμφωνα με τις προδιαγραφές σας. Παρ' όλα αυτά, αν παραλάβετε μία ελλιπή παραγγελία ή προϊόντα διαφορετικά από αυτά που παραγγείλατε ή αν υπάρχει κάποιος άλλος λόγος που δεν είστε ικανοποιημένοι με την παραγγελία, μπορείτε να την επιστρέψετε ολόκληρη ή κάποια προϊόντα από αυτή και να λάβετε πλήρη επιστροφή χρημάτων για τα προϊόντα. Προβολή πλήρους πολιτικής επιστροφών

Details zur Produktkonformität

Bitte beachten Sie die unten aufgeführten Konformitätsinformationen zu diesem Produkt.

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Κατασκευαστής:
Οι παρακάτω πληροφορίες αφορούν τα στοιχεία επικοινωνίας του κατασκευαστή του σχετικού προϊόντος που πωλείται στο Fruugo.

  • Luminary Lane
  • Dongguan Zuiyu Electronic Technology Co., Ltd.
  • Room 401, No. 19, Dongxiang, Yanggonglang, Qiaotou Town, Dongguan City, Guangdong Province
  • Dongguan
  • CN
  • 523520
  • simona14@163.com
  • 17512067209

Υπεύθυνος στην ΕΕ:
Οι παρακάτω πληροφορίες αφορούν τα στοιχεία επικοινωνίας του επευθύνου στην Ε.Ε. Ο υπεύθυνος είναι ο καθορισμένος οικονομικός φορέας που εδρεύει στην Ε.Ε. και είναι υπεύθυνος για τις υποχρεώσεις συμμόρφωσης που αφορούν το σχετικό προϊόν που πωλείται στην Ευρωπαϊκή Ένωση.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • FR
  • 75004
  • infoapexchen@gmail.com
  • 33 745713901