Features: 1. Material: Silicone, Size: Approx. 3x 2cm. 2. Good elasticity, strong tensile strength, waterproof and wear-resistant. 3. Installation method: First of all, before installing the handlebar strap and hand change, put the strap fixing ring on the handlebar in the correct direction the arrows points to the stem first, pay attention to the transmission brake cable tube through the fixing ring, and then Move to the middle position of the handlebar. Secondly, install and adjust the two manual shifts, then install and arrange the brake transmission line tube and the wires core; start from the blocking position to wind the handlebar tape, to the appropriate position in the middle of the crossbar, cut off the excess handlebar tape, and put on the handlebar tape Retaining ring can be used in conjunction with the adhesive tape on the handlebar. 4. After installation, the ends of the handlebar straps are not easy to loosen, and does not need to be wrapped with tape. 5. Suitable for road bikes, fixed gear, drops bars or both ends of the straps that can be used. Notice: 1.Actual color may be slightly different from the image due to different monitor and light effect 2.Please allow 1-3cm deviation due to manual measurement Description: Name: Road bike handlebar strap fixing sleeve Material: Silicone Weight: 10g/pair Packing: 1 pair/bag Package List: A pair of Handlebar Tape Wrap Fixing Ring Sleeve