Generator Auto Start Control Panel for Deep Sea Electronics Spare Parts DSE710 DC8～36V Item Type: Generator Auto Start Control Panel Specifications: Power Supply: DC 8～36 V Current Consumption: 180mA, 12V; 190mA, 24V Internal Programmable Control Output: Active DC, ≤2.4 ampere Oil Valve and Motor Control Output: Active DC, ≤3.4 ampere Transformer: Secondary current 5 ampere, 0.5VA Operating Temperature Range: -20℃ ～ 70℃ Product Size: Approx. 209 x 146 x 31mm / 8.2 x 5.7 x 1.2in Installation Opening: Approx. 182 x 137mm / 7.2 x 5.4in Control Function: Automatic mains monitoring Emergency stop control Automatic control of cranking Local manual start/stop Remote automatic start/stop Start the motor automatically exit control Multiple modes of preheating control Stop power supply control Dual power switch switching control Start delay control Protective Function: Low lubricating oil pressure protection The charger fails to charge Emergency shutdown of generator set Generating set public alarm High cooling water temperature protection Engine overclocking protection Engine low frequency protection Engine shutdown failed Engine failed to start Alarm Indication: Corresponding alarm indication mark on the LCD screen The public alarm light is always on for warning; flashing for alarm Parameter Configuration: Parameter configuration through the control panel Parameter configuration through dedicated software Parameter Display: Lubricating oil pressure Running time Cooling water temperature