Fiber Fusion Splicer 5 Inch TFT LCD Full Automatic Optic Fiber Welding Splicing Machine Kit 100‑240V US Item Type: Fiber Fusion Splicer Material: ABS Model: A 86S Applicable Fibers: SM (G.652 G.657), MM (G.651), DS (G.653), NZDS (G.655), and custom fiber types Battery: 1 x 11.1V lithium battery (6700mAh) (built in) Splicing Loss: 0.02dB (SM), 0.01dB (MM), 0.04dB (DS NZDS) Return Loss: Better than 60dB Typical Splicing Time: 9 seconds Typical Heating Time: 26 seconds (heating time can be set, heating temperature can be adjusted) Fiber Alignment: Accurate alignment, inner alignment, clad alignment Fiber Diameter: Cladding diameter 80-150μm, coating diameter 100-1000μm Cutting Length: Coating layer below 250μm: 8-16mm; Coating layer 250-1000μm: 16mm Fiber Fixture: Multi functional fixture, suitable for bare fiber, pigtails, jumper wires, leather wires, replacement fixture can be used for SC and other connector for various FTTx fiber optic cables Magnification: 400X (x axes or y axes) Heat Shrink Tube: 60mm, 40mm, and a range of microtubes Display: 5.0 inch TFT color LCD screen, content can be flipped for easy bidirectional operating External Interface: USB interface, convenient for data download and software update Splicing Modes: 17 sets of usage modes Heating Modes: 9 sets of usage modes Splicing Loss Storage: Internal memory stores 5000 updated splice results Battery Life: Capable of continuous splicing and heating for no less than 200 times Power Saving Function: Can save 15% lithium battery power in typical environment Operating Environment: Temperature: -10~+50℃ Humidity: <95%RH (non condensing) Altitude: 0~5000m Maximum Wind Speed: 15m/s