NBR Foam rubber, baby bumpers edge guard can absorb impact and protect your child from sharp edges and corners, our cushioned foam for safer impact where babies need it mostDimensions: 2m, premium NBR edge guard; Apply on glass tables, beds, kitchen units, desk, bedroom furniture and more, can be used on all surfaces steel, wood, glass and ceramic etc, Protect your family from injury when falling or hitApply to nursery decoration, child room protection, playground renovation, home security protection essential products. Before installation, be sure to clean the surface of the adherend. If it is greasy, dust, or moisture, it will be difficult to stick as expected. The plaster wall, brick wall and tempered glass may be slightly less stickyColor: BeigePackage include: 1* baby bumper edgeWARNING:THIS IS NOT A TOY OR TEETHER.For use by adult only.DO NOT leave your child unattended. Keep packaging away from children. Please avoid children biting.Before installation, be sure to clean the surface of the adherend. If it is greasy, dust, moisture or unevenness surface , it will be difficult to stick as expected. The plaster wall, brick wall and tempered glass may be slightly less sticky.TO INSTALL (Best for one-time use only):1. Measure distance of furniture edge between two corner cushions;cut section of edge cushion to fit;repeat as necessary;2. Dry wipe surface area of furniture edge;3. Apply double-sided tape firmly to both inner surfaces of edge cushion by aligning tape to cushion鈥檚 outer edges: start at one end and apply strips of tape to cover entire length of edge cushion;4. Remove tape backings and push cushion deeply and snugly into furniture edge;5. Press both sides of cushion firmly for several seconds along its complete lengthAfter pasting, please press hard and leave it for 24 hours before touching it. It is best not to touch it during the period.After using for a long time, you can wipe with a wet towel to remove the stains.