Item Type: Wind Pressure Transmitter Material: Aluminum alloy Measuring Medium: Non-corrosive gas Overload Capacity: Single-ended minimum withstand voltage 4Kpa, maximum withstand voltage can not exceed 25 times the range Measurement Accuracy: 0.2%FS Output Signal: 4~20mA Power Supply: DC24V Wire Length: Approx. 50cm / 19.7in Pagoda Mouth Diameter: Approx. 8mm / 0.3in Temperature Drift: ±0.1%FS/℃ Ambient Temperature: -30℃~+80℃ Environmental Humidity: ≤85%RH Applicable Environment: Widely used in pressure measurement in clean rooms, boilers, dust collectors, vacuum cleaners, power plants, air conditioners, etc. Size: Approx. 60mm / 2.4in 51mm / 2in 45mm / 1.8in 20mm / 0.8in 64mm / 2.5in 4mm / 0.2in 40mm / 1.6in 35mm / 1.4in 30mm / 1.2in 10mm / 0.4in 1.5mm / 0.1in 1、Wind pressure transmitter has high sensitivity, high accuracy and strong anti-overload capability. 2、Transmitter sensor and amplifier circuit are highly integrated with good performance. 3、The product has strong anti?interference ability, long?term stability and reliability. 4、Using unique stress isolation technology, accuracy temperature compensation and high stability amplification treatment. 5、The signal of the measured medium can be converted into a 4-20mA output signal. 1 x Wind Pressure Transmitter