1. FC1307A, JM20330 solution 2. Supports 0 of four TF cards, that is, the capacity of four TF cards is added together. It is recommended to use the same model and performance TF. You can also use a single card in the first TF position, or use dual cards in the first and second positions. 3. Compatible with DOS, WINCE, WIN98/XP/VISTA/NT, WIN7/8/10 and LINUX operating systems. 4. Equivalent industrial use flexibly plug and unplug SSD, use TF as a mobile hard disk to achieve flexible data storage. 5. After the hard disk is transferred, it can be used as a system boot disk or a data disk. TF supports high-speed cards. TF has been tested so far to support a maximum of 128GBx4=512GB. Compatible with GEN1 and GEN2, Dual Data Transfer Rates: Compatible with Gen1 (1.5Gbps) and Gen2 (3.0Gbps), supports high-speed TF/SD Memory Card to Adapter cards, achieving a total capacity of 512GB in 0 configuration. Plug-and-play with full system compatibility. Support edge opening. Make a slot on the user's device chassis facing the TF card slot opening to achieve TF mobile storage. Work with BIOS and to support and TF hot-swap, plug and play, and can be used without any driver. When hot-swapping the TF card, pay attention to the coordination of BIOS, and application. Do not hot-swap when reading and writing data to avoid data loss. In general, cold-swap is recommended to achieve mobile storage of data. Size: Compatible with 2.5-inch and 3.5-inch hard disk interfaces. Standard 2.5-inch hard disk plastic shell. You can also specify to purchase a bare board. It can be used on desktops and . Color: Black Material: PCB Package Contents: 1 x 4-Port TF to Adapter Card 1 x SSD Case 1 x screwdriver 1 pack x screws Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.