and high quality Gigabit PoE splitter to split the PoE signal into 5V USB-C power supply and gigabit Ethernet in RJ45 so that non-PoE devices can be powered over Ethernet. Deliver power and data with a single Ethernet cable for fewer wall plugs and messy cables. Extend power to locations without nearby AC outlets, up to 300 feet from the power source. A cost-effective solution to add plug-and-play PoE support to 5V USB-C powered devices and make full use of PoE switches, or for a Raspberry Pi 4 setup where a PoE HAT is not applicable. Requires an IEEE 802.3af compliant PoE switch or injector as the PSE (Power Source Equipment) and an Ethernet cable with PoE signal to feed the splitter. Note: 1. This splitter does not support PD or QC fast charging protocols. 2. This splitter provides a maximum output of 3A with its 802.3af compliance. 3. Leave the split Ethernet cable unused if data connection is not needed. 4. The split Ethernet cable does not carry power. Specifications: Compatible: IEEE802.3af/at Output: 5V/3A Data speed: 10/100/1000Mbps Input: DC 44-57V Size: approx. 78x28mm / 3.07x1.10in Note: Please allow 0-1cm error due to manual measurement. Due to differences in monitor displays, the image may not reflect the actual color of the item. Package Includes: 1 x Gigabit PoE Splitter