1M/2M Collapsible Bathroom Threshold Water Dam Stopper Blocker Splash Guard Dry Wet Separation Flood Barrier Door Bottom Sealing Strip Feature: Product Size This product is suitable for all bathrooms and kitchens.The product size is 1.18''/30mm(H)* 0.63''/16mm(W)inches, which can effectively block water.The height is higher than most bathroom water retaining strips,better water retaining effect. Dry And Wet Separation Design Are you tired of the water in the bathroom and kitchen? After installing this water retaining strip, water will no longer leak out. The shower threshold provides good protection and can keep water in the shower to prevent water from overflowing.Ideal for curbless showers and other areas where water needs to be contained. Shower Flood Barrier The silicone shower threshold water dam is soft and foldable,flexible design creates all sorts of shapes.Bendable when stepped on, it will rebound to its original shape at once. Accessible and friendly to wheelchairs. Easy Install & Cuttable Length Thanks to strong self-adhesive design, After peeling, just press it lightly to make it close to the ground, water-proof, and very labor-saving. Soft enough,The dam size according to your choice. It can be easily cut to the length you need. Wide Range Of Uses The threshold for the bathroom, the kitchen and the bedroom provide a good protection,While solving the water leakage problem, it also beautified the decoration. Specifications: Name:Water Barrier Size:16mm*30mm(Width*High) Material: Silicone Color: Transparent/White Lenght:60cm-300cm (optional) Note: 1.This product comes with self-adhesive, easy to install,it is close to the ground and does not leak water. 2. The product is not equipped with glue. It is recommended that the customer purchase and use glass glue for reinforcement, which can last longer. How to use: 1. Wiping off the water and dust on the ground. 2. Determining the position of the water retaining strip and mark it with a pen on the ground. 3. Remove the adhesive and install the water barrier in the marked position. 4. Seal the rubber strip at the position where the two ends of the water retaining strip are in contact with the wall. 5. Apply glue on both sides of the water stopper and apply evenly. Package Included: 1pc x Water Stopper(Length Optional)