①. Power saving technology: This device turns on and remains in standby mode completely automatically, there is no need to turn on a special button or turn it on every time you reconnect. Thanks to the special technology used, you can connect the device to the OBD2 connector of your car without damaging the battery. ②. Features: Supports 12V/24V vehicles that comply with the OBD2 protocol standard, as long as the APP used supports the car model. Automatic switching of HS CAN/MS CAN. Supports all OBD2 protocols. The OBD2 connector requires up to 4128 bytes to communicate with large data. The buffer size of this interface is 8192 bytes. Data transfer speed up to 3 Mbit. Supports Ford FEPS 18V programming signal (18V on OBDII branch 13). USB 2.0. ③. Programs used with this adapter: All programs for ELS27/ELM327 adapters. ELS27 baud rate Program for setting the speed and operating mode of the ELS27 adapter, the selected configuration is saved inside the adapter. FORScan program for diagnosing Ford, Mazda, Lincoln and Mercury cars. The ELMConfig program is used to diagnose, flash and configure the unit of Ford Focus 2, C-MAX mk1, Kuga mk1, Mondeo 4, S-Max, Galaxy cars. It is designed to change the configuration and open hidden functions. The FoCCCus program is used to tune the Ford Focus 3, also partially used in the Fiesta 7 and Kuga 2 electronic parts platform. The STool program is used to adjust the odometer. The ELM-FFn program is used to process Ford Fusion and Ford Fiesta cars.