<p>How to Use the panel tool as Below: 1. Please make sure your Panel Resoultion ,Power for the Panel and Backlight that you need to Test. such as LTN170X2-L02 we Need to Know the Resolution 1440x900 6bits ,30pin Double LVDS cable and the power is 3.3V supply</p> <p>2. Connect the Power to the Panel tester ,the power input is 12V-3A or 12V-5A DC port 2.5MM and 5.5MM inner + outside -</p> <p>3. S1 or S2 set The resolution ,such as the 1440*900 ,you need to set the display on 36</p> <p>4. Choose the Panel supply Voltage , the Auto for 5 seconds .if you panel is 3.3V then you not need to Choose</p> <p>5. Connect the LVDS cable and the Backlight Line. the power ,then the LED Light. the Up or Down test the Panel .After test finished,Power off</p> <p>Detailed information about the LVDS cables:</p> <p>DF14-20Pin-Single8</p> <p>DF14-20Pin-Single6</p> <p>FIX-30Pin-Single8 (power on left) bit</p> <p>FIX-30Pin-Single8 (power on right) bit</p> <p>FIX-30Pin-Double6 (power on left) bit</p> <p>FIX-30Pin-Double8 (power on left) bit</p> <p>FIX-51Pin-Double8 (power on left) bit (Most universal LVDS cable for 32-65inch screen)</p> <p>FIX-51Pin-Double8 (power on right) bit (Most universal LVDS cable for 32-65inch screen)</p> <p>FIX-30Pin-Double8 (power on left) bit (for 17-42inch screen)</p> <p>FIX-30Pin-Double8 (power on right) bit (for 17-42inch screen)</p> <p>FPC-LVDS-30Pin-Single8 (power on left) bit</p> <p>FPC-LVDS-30Pin-Single8 (power on right) bit</p> <p>LP-40Pin-Double6(LED laptop HD)</p> <p>LP-40Pin-Single6(LED laptop SD)</p> <p>Totally 14 pcs LVDS\/FPC cables for 12-65inch laptop\/TV screen</p> <p>Colour:As Shown</p> <p>Material:PC+Metal</p> <p>Package Contents:</p> <p>1 * Screen Tester Kit</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>