Model: Gear Cable Tying Tool Size: 4.6-24mm steel belt and less than 1.2 use thickness Material: special steel Thickness: 30 mm Fire classification: AAA Scope of application: steel belt tightening Function disconnection, clamping line Form a flat mouth Applicable objects: pipe, cable The characteristics tighten the material ; Special steel handle material Weight 1600 (g) Specification 25 (mm) Scope of application: railway bridge framework, signaling, municipal administration, etc. Boxed packaging Manual tightening method How to use 1. Add 10 to 15 cm depending on the circumference of the object, take it out of the cable tie box and cut it 2. After putting on the loop, turn the head of the ties on the inside of the back 3 to 4 cm to complete the loop 3. Insert the other end of the cable tie into the groove of the strapping roller after placing it on the linked object 4. Hold the belt tightening machine with the left hand and rotate the gear key back and forth with the right hand until the clip is tight 5. Push the belt tightening machine upwards so that it rests against the buckle 6. Pull the knife handle with your right hand to cut the cable tie and remove the clamping machine 7. Use hammer to hit the ear-shaped clip of the buckle to finish fixing Please allow slight deviation in the measurement data and make sure you do not mind before ordering. High quality store for you Tips from the store: 1. The size is manually measured, please allow the error (1-3cm). 2. Due to the different monitor pixels, there may be some color difference, please refer to the actual product.