1、Wide Range of Use: Adopt 3 in 1 fiber optic holder, suitable for single mode, multi mode, rubber insulated, multi core optical cables, bare fiber, pigtail, patch cable, leather cable. 2、Good Welding Performance: This splicer provides 8s fast welding and 18s fast heating, has low welding loss, which is 0.025dB for SM cable, 0.01dB for MM cable, 0.04dB for DS or NZDS cable. 3、High Resolution Display: This splicer is equipped with 5in TFT colour screen display with high resolution, and the focusing magnification is up to 300 times, for more convenient and precise welding. 4、10 Languages: The interface can switch 10 languages freely, which are English, French, Russian, Italian, Portuguese, Polish, Spanish, Thai, Arabic. 5、Built in Lighting and Battery: The machine is built in lighting, convenient for operating at night, and with large capacity battery, which ensures long time stable working. 1 x Tool Box1 x Cutting Knife2 x Electrode Rod1 x Leather Cable Pliers1 x 3 Port Pliers1 x Strap1 x Hand Strap1 x Power Adapter1 x Alcohol Bottle1 x Brush1 x Manual1 x Bare Fiber for Discharge Calibration2 x Key1 x Power Cable3 x Hex Wrench Item Type: Fusion SplicerMaterial: ABS, PCB, stainless steelFiber Alignment: Core, cladding, manual alignmentSplicing Time: 8sHeating Time: 18sHeating Method: Automatic heating (preheating)Focusing Method: Six motor autofocusSplicing Loss: 0.025dB(SM), 0.01dB(MM), 0.04dB(DS NZDS)Splicing Method: Real time control and calibration of splicing arcReturn Loss: Better than 60dBFiber Diameter: Cladding diameter 80-150μm, coating diameter 100-1000μmCutting Length: Coating layer below 250μm: 8-16mm, coating layer 250-1000μm: 16mmBuilt in Lighting: Easy to operate at nightTension Test: Standard 2NFiber Holder: 3 in 1 fiber holder, suitable for single mode, multi mode, multi core, fiber, bare fiber, pigtail, patch cable, leather cableMagnification: 300 times (X axes or Y axes) 150 times (X axes and Y axes synchronization)Display: 5 inch TFT colour displaySplicing Mode: Conventional or high precise splicingData Storage: Splicing record storage synchronization to mobile phone, server to cloud storage unlimitedBuilt in Battery: 5200mAh high capacity lithium battery, charging time is 3.5 hours, can be continuously welded and heated for 160 times (built in)Power Supply: AC 100-240V 50/60Hz, output DC 13.5V 4A, the current power mode can be identified, real time detection of battery capacityWorking Temperature: 0℃ to 40℃, Working Humidity: <95%RH (no condensation)Heat Shrinkable Sleeve: Approx. 60mm/ 2.4in, 40mm/ 1.6in