Item Type: Draw Wire Encoder <br>Range: Approx. 10 ~ 1200mm / 0.39 ~ 47.24in <br>Voltage: DC8-24V <br>Output: Push pull output <br>Cable Length: Approx. 1.5meter / 4.9ft <br>Main Body Outer Diameter: Approx. 38mm / 1.5in <br>Outgoing Mode: Side outgoing mode <br>Central Shaft Diameter: Approx. 6mm / 0.24in <br>Operating Temperature: -25℃~+85℃ <br>Voltage: DC5-24V<br>1、TECHNICAL PARAMETERS: Encoder has 0.25%FS linearity, range 10?1200mm, voltage DC8?24V <br>2、OPERATION MODE: Encoder adopts efficient linear displacement measuring device, push pull output, side out line <br>3、APPLICABLE SCENARIO: Applicable to cylinder, testing machine and other industries, air pipe production equipment, printing equipment, automatic welding machine, automatic encoder, ink jet machine, robot and so on <br>4、STABLE PERFORMANCE: Encoders are suitable for all kinds of environments. They are widely concerned for their small size, excellent performance under bad conditions, accurate, flexible and simple installation <br>5、WIDE APPLICATION: Encoder is widely used in water conservancy, steel industry, has a large choice space1. During installation, the cable should be vertical to the encoder, and the cable should not rub against the outlet. <br>2. Do not loosen the cable connector after it is pulled out; otherwise, the sensor may be damaged. Do not exceed the total length of the wire when pulling.1 x Draw Wire Encoder