Hign-concerned Chemical:NoneOrigin:Mainland ChinaScope of application of glue: White glue stick: suitable for dealing with relatively thin parts of Japanese car paint, and can be used at high and low temperatures. Yellow glue stick: It is suitable for the relatively thick paint of European and American cars, and it is also suitable for dealing with small depressions. Black glue stick: It can be used for various models, and the effect is better when the temperature is 20-28 degrees Celsius. Question 1: The glue is not strong, the glue is debonded, what is the reason? 1. The viscosity of hot melt adhesive is related to the temperature. The ideal temperature is 20C-28C. Note: Do not operate under the sun in summer, and the operating temperature in winter is above 10 (if the weather is very cold, you can first pour hot water on the wagon in the recess) 2. If the car has been waxed or plated with crystal film or the material of the recess is not iron sheet, the stickiness of the tape will be greatly affected. 3. It may be that the product is dusty during use. Before use, it is best to use alcohol to clean the rubber strip, the dent surface and the gasket. 4. If it is degummed during operation at ideal temperature, this is a normal phenomenon, and it only needs to repeat the operation. If the depression cannot be repaired after repeated operations, it may be that the puller is not suitable for processing the depression. This is related to the shape, position and size of the depression. Not all depressions can be repaired with one product, which has nothing to do with the glue. Question 2: How to remove the glue You can use alcohol above 95 degrees, while tearing it again and spraying alcohol, the residual glue can be buttoned off with your fingernails. Asphalt, gasoline or diesel can also be used. (Because alcohol is flammable and cannot be transported, please buy it locally. Sorry for the inconvenience caused.)