Features: 1Stainless Steel: Made with excellent materials this pressure cooker is highly heat resistant and can withstand harsh environment ensuring long lasting quality and durability. 2Efficient Cooking: With high pressure cooking the pressure cooker raises the boiling point of water significantly reducing cooking time compared to traditional stovetop cooking. It also retains more nutrients in the food. And internal circulation makes the cooking more even. 3Multi Functional Design: This pressure cooker can be used for cooking rice stewing soup steaming making porridge and boiling noodles. It offers versatile cooking options for your convenience. 4Intelligent Protection: Equipped with a safety valve and pressure limit device this high pressure cooker intelligently controls the internal pressure ensuring a safe cooking process. The pressure limit valve auto locks when the internal pressure reaches 80KPA. At this time the lid cannot be opened until the pressure lower down 80Kpa. 5Wide Compatible: The pressure cooker is compatible with both induction stovetops and gas stoves allowing for quick and efficient heat transfer. It is versatile and can be used on different types of cooktops. Specification: Item Type: Pressure cookerMaterial: Stainless steelCompatible: Induction cooker gas stove electric stove ceramic stovePressure: 80kpaApplication: Suitable for food that need long time cooking like whole meat soup rice and congeeSafety check:Before each use please open the anti blocking cap and carefully check if the exhaust pipe is unobstructed by shining a light source on the inner side of the lid. Check if the anti blocking cap pressure limiting valve and safety valve are clean. If there is any blockage it must be immediately removed; check if the sealing ring is in the correct position.Proper closing of the lid:When closing the lid align the down mark on the lid near the handle with the up mark on the handle underneath the pot fasten the lid and turn the handle clockwise until the upper and lower handles are aligned.When closing the lid the bottom of the lid should be parallel to the pot opening and pressure should be applied evenly around. If unable to close please refer to the relevant content in the Trouble and solution section and do not forcibly close it to avoid damaging the components.Cooling and pressure reduction: Before opening the lid move the pot away from the heat source. Let the pressure cooker cool naturally at room temperature or forcibly cool it with cold water. Note: Try to avoid immersing the pot in cold water for cooling and pressure reduction so as not to change the performance of the pot.Opening the lid:Before opening the lid the pressure limiting valve must be removed. Make sure there is no steam or only a small amount of steam discharged from the exhaust pipe and the pressure indicator has returned to its original position. Then turn the handle counterclockwise and open the lid when the down mark on the lid aligns with the up mark on the handle underneath the pot.Trouble and solution:Pressure indicator (stop valve) does not rise: Insufficient firepower of the stove (increase firepower) insufficient water in the pot (remove the pot from the heat source cool it open the lid clean and add enough water) unclean stop valve (remove the pot from the heat source exhaust the steam open the lid and clean the corresponding parts) body or lid not properly closed (align the body and lid and align the upper and lower handles).