S800 Case Instruction: ATTENTION:Since the assembly process involves voltage that exceeds the human body's safety, non- should not operate, you must do insulation and protective measures during the assembly process, and check the wiring for safety, please place the product at a placethatchildren and old people cannot . Please use the switch power supply we recommend, and if you use other power source, check if the positions of fixing holes are suitable or not. Assembly step Note:The case material is a bit soft and may be slightly deformed during transportation. If there is a space during the assembly, please straighten it it. Back board assembly: install the rocker switchandAC power socketon the lower board. to switch power supply: (dangerous,non- should not operate) Uselongbrown cable to connect therockerswitch and the live wire (L) of the switch power supply; then useshortbrown cable to connect therockerswitch and the live wire (L) of the AC power socket; Use the blue cable to connect the neutral wire (N) ofAC power socket and the neutral wire (N) of switch power supply; Use a yellow-green two-colorcableto connect the ground wire (E) ofAC power socket and the ground wire () of switch power supply.Use two red cables to connect the IN+ of the green terminal and the electrodes (+V), and use two black cables to connect the (IN-) of the terminals and negative electrodes (). Install the temperature sensor extension board to the back panel. the switch power supply:Installthe switch power supply on the lower board colour: creamy-white material: metal Package Contents: 1 x Top cover 1 x lower cover 9 x Connect the wire 1 x switch 1 x Product socket 4 x Anti-slip mats 11 x tching power supply/pad fixing screw 10 x Fixed screw for shell/product socket Only the above package content, other are not included. Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.