1、[PRESET TEMPERATURE] The temperature of the 3 channels can be preset, and the temperature setting range is 150℃‑480℃ or 302℉‑896℉. 2、[SENSOR FRONT] Sensor front design, real time monitoring of the temperature of the soldering iron tip to ensure rapid temperature recovery. 3、[INTEGRATED DESIGN] The soldering iron tip (integrated with the heating element) is a plug in design, easy to replace and operate. 4、[ANTI STATIC DESIGN] With LCD screen display, and anti static design, effective protection of electronic components. 5、[AUTOMATIC SLEEP] With automatic sleep function, which can extend the service life of the soldering iron tip, more practical. 1 x Soldering Station1 x Soldering Iron Stand1 x Soldering Iron1 x Soldering Iron Tip1 x Chuck with Wire1 x Heat Resistant Sponge1 x Power Cord1 x Washer1 x User Manual Item Type: Digital Soldering StationProduct Model: HK-1000Display Type: LCDPower: 90WTemperature Setting Range: 150℃-480℃ / 302℉-896℉Temperature Stability: ±2℃ (still air no load)Maximum Ambient Temperature: 40℃Soldering Iron Tip to Ground Potential: <2MVSoldering Iron Tip to Ground Resistance: <2ΩSoldering Station Size(L x W x H): Approx. 120 x 160 x 100mm / 4.7 x 6.3 x 3.9inInstall and Set up the Soldering Station: Before installing the soldering station, please check whether the power supply voltage used is consistent with the rated voltage value of the equipment specifications.Use of Bracket and Sponge: Sponge is a squeezable object, and it swells up when wet. When using the sponge, wet the water first and then squeeze it dry, otherwise it will damage the welding tip.During the working process, if the sponge becomes dry, add water in an appropriate amount. 1. After taking the sponge out of the sealed bag, place the sponge in the groove of the base of the bracket. 2. Add a little water to the bracket, and the sponge will keep wet after absorbing the water.Temperature Setting: When setting the temperature of the soldering station, ensure that the temperature of the soldering station is in an adjustable state. The heating body (host) is not disconnected from the power supply during the temperature setting process.Welding Tip Use: Too high temperature will weaken the function of the soldering iron tip, so choose the lowest possible temperature. The temperature restoring force of this soldering iron tip is excellent, and it can be fully soldered at a lower temperature, which can protect temperature sensitive components.Tip Cleaning: Use a cleaning sponge to clean the tip of the soldering iron regularly. After soldering, the oxide derived from the residual flux of the soldering iron tip will damage the soldering iron tip, cause soldering errors, or reduce the thermal conductivity of the soldering iron tip. When the soldering iron is used continuously for a long time, the soldering iron tip should be disassembled once a week to remove oxides to prevent damage to the soldering iron tip and reduce the temperature.When not in Use: When the soldering iron is not in use, do not leave the soldering iron in a high temperature state for a long time, which will cause the flux on the soldering iron tip to convert oxides, which will greatly reduce the thermal conductivity of the soldering iron tip.