Features1The outer casing is made of polycarbonate material with high mechanical strength, high hardness and corrosion resistance. 2Small size, light weight, easy to carry and assemble, with 8 indication directions, easy to operate. 3With the internal smooth bearing system, it ensures the accuracy of information collection and is more convenient to use. 4Rust-resistant, anti-exposure, high impact strength, long-term use in outdoor environments and anti-electromagnetic interference treatment can be applied to both four-wire and three-wire connections. 5It adopts high-performance bearing, has low rotational resistance and accurate measurement, and is widely used in wind direction measurement in greenhouses, environmental protection, weather stations, ships, docks, and aquaculture.SpecificationItem Type: Wind Speed SensorMaterial: PolycarbonateApplication: Widely used in wind direction measurement in greenhouses, environmental protection, weather stations, ships, docks, and aquaculture.Power Supply Wiring: Wide voltage 10-30V DC power input. Only 24V power supply is available for 0-10V output equipment. Parameter:DC Power Supply (Default)10-30V DCMaximum Power ConsumptionVoltage Output1.2WTransmitter Circuit Operating Temperature-20 to +60, 0%RH-80%RHMeasuring Range8 Indication DirectionsDynamic Response Time0.5sOutput SignalVoltage Output0-10VLoad CapacityVoltage OutputOutput Resistance 250Calculation Method:0-10V Output Comparison TableOutput Value (V)Corresponding Wind Direction0North Wind1.4286Northeast Wind2.8571East Wind4.2857Southeast Wind5.7143South Wind7.1429Southwest Wind8.5714West Wind10Northwest WindProduct Size: Approx. 23.5 x 18.5 cm / 9.3 x 7.3 inWeight: Approx. 317g / 11.2ozCommon Problems and Solutions:No output or output error possible causes:1) The range corresponding error causes the error PLC calculation. Please refer to the technical indicators for the range.2) The wiring method is incorrect or the wiring sequence is wrong.3) The power supply voltage is incorrect (24V power supply for 0-10V type).4) The distance between the transmitter and the collector is too long, causing signal disturbance.5) The PLC collection port is damaged.6) Equipment damage.Package List1 x Wind Speed Sensor 1 x Cable 1 x Screw Kit (4 x Screw, 4 x Nut)