_x000D_ 0~60 Psi Propane Regulator High Pressure Gas Regulator Adjustable Braided 3/8 Inch Flare Swivel Nut Hose Connector With Gauge Features: 1. Measure Pressure: Use a pressure gauge to determine and adjust the PSI of propane. The measuring range of the pressure gauge is 0-60 psi (and 1-4 100xKPA), allowing users to precisely control the heat. 2. Equipment End Accessories: 12 feet 0-30 PSI high pressure stainless steel hose, 3/8 inch internal thread torch connector, suitable for gas barbecue stove, gas stove, hot pot, burner, smoker, cooker, flame pit and heater, heat water heater, as long as your device connection is a 3/8-inch male flared connector. 3. New Upgrade: The black accessory is a POL connector, which can directly connect a 40-pound propane tank to a 100-pound tank without moving the atmospheric pressure bottle. The barometer allows you to precisely control the heat output to keep outdoor cookware in its best working item. 4. Durable Material Design: The main body of the propane hose is made of stainless steel, which can effectively reduce the damage caused by friction and animal bites. It beats ordinary rubber that has aged in the sun and provides a firm airtight connection between the grill and the turkey fryer or the burner and the water tank. 5. Convenient and Easy to Install: No tools are required, and it is equipped with a hand-tightened hand-wheel. Easy to install. Type 1 (QCC 1) tank end connector and 5/8 inch-18UNF outlet connection-3/8 inch female threaded flared joint has an outer diameter of 5/8 inch. The connection seal does not require PTFE tape. Please do not use this adjustment The device should be equipped with a low-voltage regulator. Specifications: Outlet pressure: 0-30PSI Tube length: about 12 feet (FT) Weight: about 1200g Material: stainless steel covered wire tube Maximum working pressure: 350PSI Inlet port: POL Packing List: 1*Pressure Adjustable Propane Regulator _x000D_