1-5pcs INA226 CJMCU-226 IIC I2C Interface Bi-Directional Current/Power Monitoring Sensor Module For Arduino Description The INA226 is a current shunt and power monitor with an I2C- or SMBUS-compatible interface. Thedevice monitors both a shunt voltage drop and bussupply voltage. Programmable calibration value,conversion times, and averaging, combined with aninternal multiplier, enable direct readouts of current inamperes and power in watts. The INA226 senses current on common-mode bus voltages that can vary from 0 V to 36 V, independent of the supply voltage. The device operates from a single 2.7-V to 5.5-V supply, drawing a typical of 330A of supply current. The device is specified over the operating temperature range between 40C and125C and features up to 16 programmable addresses on the I2C-compatible interface Features Senses Bus Voltages From 0 V to 36 V High-Side or Low-Side Sensing Reports Current, Voltage, and Power High Accuracy: 0.1% Gain Error (Max) 10 V Offset (Max) Configurable Averaging Options 16 Programmable Addresses Operates from 2.7-V to 5.5-V Power Supply 10-Pin, DGS (VSSOP) Package Applications Servers Telecom Equipment Computing Power Management Battery Chargers Power Supplies Test Equipme Pin Description VBUS: bus voltage input SDA/SCL: IIC bus data and clock signal lines ALERT: Multi-function alarm output A0/A1: IIC address line IN+/IN-: non-inverting analog input, inverting analog input [xlmodel]-[photo]-[0000]