This camping light adopts a new rubber+ABS composite material. The main body of this light is a soft rubber composite material, which has the characteristics of no fracture and no deformation after 10,000 times of compression and stretching, and has strong anti-corrosion and anti-aging effects. Work as usual under low temperature resistance of 40 degrees. Combined with solar power and 5V DC micro USB charging method and three-speed touch switch design. Built-in 500MAH polymer lithium battery can support 1 LED lighting .2W for 2 hours at the first level, 4 hours for the second level 0.6W LED lamp bead lighting, and 20 hours for the third level 0.12W lighting. A solar charging board 0.3W high output power is attached to the top of the lamp. Usually the battery can be fully charged in 10 hours. The side of the lamp is equipped with a USB charging interface and a USB charging cable. When cloudy, it can be connected to 5V DC Micro USB for 1 hour to fully recharge. This lamp can be used in various ways. The upper part is designed with a handle for hanging the lighting and the bottom two sides have gradient fixing holes. The suction cups inserted into the gradient holes can be fixed to the glass for lighting It can also be adjusted by the angle of stretching the bending surface angle of lighting.