10pcs M4-M22 Broken Head Taps Remover Stripped Screw Bolt Nut Tap Extractor Guide Set Hand ToolsFeature:1. Suitable for industrial screw and bolt disassembly and daily household maintenance work. Used to remove peeled, rusted, broken or corroded screws and bolts.2. Forging of high-strength alloy steel, integral heat treatment, fastness and durability, anti-corrosion.3. This kind of tap is only suitable for broken taps that are not too tight. If the tap is too tight, it will easily break its paws.4. The smaller the extractor, the easier it is to break and the lower the success rate. Specification:Material: High-speed steelQuantity: 10 pieces = (1#-M4,2#-M5,3#-M6,4#-M7-8,5#-M9-10,6#-M11-12,7#-M14,8#-M16, 9#-M18-20,10#-M22)Packing size: about 200*100mmApplication: Insert the extractor into the tap slot of the same specification. Rotate the lever handle counterclockwise (remove the left tap and turn it clockwise) to remove the working tap. It does not damage the surface of the finished wire, and the operation is simple and effective. Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 10 X Tap Extractors