Description: Quantity: 1pc FRM01 multifunction relay control module, specifically designed for a variety of users with different requirements, the use of micro-controller as the primary controllers, presets 18 types of functions, and can be based on user requirements, customize and add other specific functions. genuine high quality power relay modules, high-power high-voltage transistors, red, blue beacons, military rank on two sides PCB board, cloth board to consider a global approach, stable performance, can be widely used in a variety of type of power control applications. Features: 1 new update to version 2.0, the module features eight types before, it increased to 18 types, to meet the needs of multiple applications; 2 increase supply anti-reverse function, power not to damage the wrong form; 3 uses top-quality high-voltage power modules, discrete power supply before replacing the most stable and reliable system; 4 rose 0.1 seconds timing, timing accuracy from the previous 0.1 seconds, upgrade to 0.01 seconds; increase of 5 in the automatic power saving feature, users can set independently. 6. Size: 66x40x1.5mm (about) Module functions: Tips: 1-8 function on power-up of 9-18 Start auto-function require high pulse signal (high duration is shorter than 20 ms, hereinafter the same) trigger the start. Feature 1: Withdrawal Timing: After the ignition, the relay delay time pulling T1, T1 between 0.1 seconds-270 hours adjustable, CH1 interface to a high-level pulse signal, repeat the above functions; Function 2: Timing off: when the power relay, relay delay time unplugged T1, T1 between 0.1 seconds-270 hours adjustable, CH1 interface to a high-level pulse signal, repeat the above functions; Function 3: Timing pull out again: After power relay not to pull, the delay time T1 reaches the relay is energized; pull the relay off after time t2 of arrival, delay time T1 and T2 in 0.1 seconds-270 hours between adjustable, CH1 interface to a high pulse signal, repeat the above functions; Function 4: Timing and then pull off: After the ignition, immediately pull the relay, the relay off delay time T1 after arrival; T2 time relay comes after disconnecting, -270 hours in 0.1 seconds, the lag time between T1 and T2 adjustable for CH1 interface a high pulse signal, repeat the above Function 5: Endless loop timing modes 1: After power relay not to pull, after the delay time T1 reaches the relay is energized; pull off the relay after the time T2 comes, and then repeat the above condition, the delay time T1 and T2 in adjustable between 0.1 second-270 hours, giving a high-level pulse signal CH1 interface, you can restart functions above; Function 6: Endless loop timing mode 2: After the ignition, immediately pull the relay delay time T1 reaches the relay off; comes after disconnecting relay T2 time, and then repeat the above condition, the delay time T1 and T2 in 0.1 seconds adjustable between-270 hours, giving a high-level interface CH1 pulse signal, you can restart the functions of which above; Function 7: Finite loop timing mode 1: 5 on the basis of functionality, increasing the number of cycles of operation, this time between T1 and T2 in 0.1 seconds adjustable adjustable-9999 NX cycles seconds between 1-9999 times for CH1 interface of a high pulse signal , the above functions can be re-started; Function 8: Finite loop timing mode 2: 6, on the basis of the function, by increasing the number of cycles of operation, this time between T1 and T2 in 0.1 seconds adjustable adjustable-9999 NX cycles seconds between 1-9999 times for CH1 interface a pulse signal above, the above functions can be