17 quenching stick multifunctional food crispy fruit machine food puffing machine popcorn machine        Note: The rice bucket, large gear and bearing seat of the extruder are made of plastic     An 8 HP expander is recommended to drive the diesel engine. The diameter of the pulley on the diesel engine (Changchai 1100 ) is 100mm=100m, and the minimum is 100m, which can be used     Q: It turned a little bit at first, then got tight, and finally got stuck. Why?   A: Look at the nameplate on the machine. If the motor model is 100, the motor power should not exceed 3KW, but the machine is marked with 55hp, which means that the motor parameters are disorderly marked or falsely high. We recommend using three-phase electricity. If you use two-phase electricity, you can use 150. The motor power is about 5kW. Machine speed should be 1200-1400 rpm. The diameter of the pulley of the motor can be about 10cm. The motor core should be made of pure copper. If it is aluminum or copper-clad aluminum, no, the wire is too small Q: How can a dome head with only one gear and groove get stuck?   Answer: The eccentric shaft and the gear cannot be installed at the same time. Only one can be installed, neither part can be installed Q: Are rice sticks thick? Is it still bubbling? A: 1: The rice is too wet and not dry enough. We need to use dry rice. Also, diesel cars rev faster. 2: If we want to thicken it, it will not look good. Cover the large nuts with a damp towel to drip. will be more beautiful and thicker Sometimes the appearance and color of the machine will change slightly, please understand, thank you.   Voltage: 380V   Yield: 30-40kg   Extruder speed: 400-500 rpm   Motor pulley diameter: 8-12cm   Diesel engine pulley 8-10cm   Matching power engine: 380v4 pole 4W or above national standard motor, speed reduction gasoline engine above grade 12 and water-cooled diesel engine above grade 8 (recommended above grade 12)