1L pneumatic set do brake fluid venting car vent clutch oil bleeding Description: Pneumatic brake fluid vent with cylinder adapters 90-120 PSI Brake fluid vent works with air compressor to quickly help vent the brakes. The simplicity of this tool allows for easy venting of brakes by a person. Rinse and fill the entire braking system yourself za using this brake fluid vent. Convenient service by a person. Rinse and fill the entire braking system 34 Used brake fluid New Fluid tank that is inserted do of the main cylinder za the included adapters. Specification: Air demand: from 90 do 120 PSI/6-, Air intake: 1/4''- 18 NPT Air consumption: 180 ltr/min : 60% Container capacity do oil extraction: 1L ok. Refill container capacity: ok. 0,75 l. Container head material do filling: copper PU hose size: ok. 2 m. Main Cylinder Tank Adapters: 1.25 inch-1.60 inch (32 do 41 mm) 1.10 inch-1.45 inch (28 do 37 mm) 0.95 inch-1.25 inch (32mm) 0.80 inch-1.20 inch (21 do 30 mm) How to use: Remove dirty brake fluid; Insert a new one; Start the car and connect the hose between the device and the brake branch pump; Twist the screw so that it is loose, but not do the end. Then open to start sucking out the liquid. When the screwing is complete, turn off. Our for universal cars, you can use the conical spout offered in the package to avoid air leakage; Please lift the tool nad with the brake pump to make sure it is working properly. The package includes: 1 sztuka brake and clutch vent 1 sztuka container do filling 4-piece adapters 1 sztuka BSP connector 1 sztuka instruction