Specification: Color: Black Material: Aluminum+ ABS Plastic Dimension(Front): 42.5"~44.5"(adjustable length) x 3"(width) x 3"(height) Dimension(Rear): 40.5"~42.5"(adjustable length) x 3"(width) x 3"(height) Load Capacity: 100LBS/45KG Instructions: Not Included Package Included: 2x Roof Rack Cross Bars Necessary hardware is included Fitment: Please check your car roof size before you purchase Compatible For TOYOTA RAV4 2013-2018 Aftermarket high strength Cross Bar Roof Rack System Black Power-coated surface, water-proof and anti-corrosion Easy to assemble & remove in minutes, no drilling/cutting required Streamline water drop design, effectively reduce wind resistance & noise Perfect Solution to hold luggage/cargo/snowboard on roof when you are on the go Max load capacity reach to 100LBS/45KG. AERODYNAMIC DESIGNStreamline design eliminates wind noise or vibration, gives a reduced air resistance of 40%-70%. Matte painted surface makes the appearance more stylish and full of sportiness. Add a sport styling and appearance to your vehicle. Application: Can work with roof accessories like cargo basket carrier, snowboard/bike rack, luggage box, kayak mount etc. 1 * Front Crossbar (Longer) 1 * Rear Crossbar (Shorter) 4 * Clamp Bracket 1 * Hexagon Wrench 1 * Lever Key 1 * Instructions Check your vehicle's owner's manual for the maximum roof load capacity and be careful not to damage the roof paint. Observe speed and height limits when driving. Observe weight limits when loading. Verify the direction of mounting support and gaskets before installation. Note the "L/R"mark underneath mounting support. Operator Safety:Use caution to avoidrisk of injury Installation procedure 1. Clean the roof before installing the roof rack. 2. Verify that the clip is correct by looking at the position markings on the top of the clip beforeinstallation. 3. Open the key cover on the mounting bracket. A: Insert the lever key and turn to unlock the lock cover, and remove the clamp foot support cover; B: Remove the lower part of the clip foot. 4.Before installation, please confirm the installation direction of the rails of the roof rack and the front and rear cross bars. 5.Assemble the front and rear roof racks: Insert the crossbar into the mounting bracket and fasten it with bolts. 6. Place the front and rear roof racks on the roof rails. 7. Install the clip foot bracket on the roof rack, and verify whether the clip is correct before installation Look for the position marker clip on it. 8. Make sure the lever screw is engaged and the bottom bracket is flush with the upper bracket, tighten the lever handle. 9. After the pull rod is tightened, step back a circle, use the opening on the bracket to pry up the pull wire, and close the pull rod. 10. Use the key provided to turn the locking lever to lock the crossbar in place. 11. After installing the roof racks, shake each rack to make sure the rails are securely fastened to the side rails