<p>Time-consuming and laborious marking of dimensions.</p> <p>Punching offset\/oblique holes, wasting the board.</p> <p>Inaccurate scale results in work errors.</p> <p>Distance between ordinary handle mounting holes: The distance between handle holes is 64\/128\/192mm, and the center hole can be used for single hole handles. The edge distance setting is 37\/50\/64mm</p> <p>Accurate positioning, simple and fast drilling: simple operation with alignment angle</p> <p>The fixed hole diameter of the drill bit is available in two sizes: 5mm and 6.25mm drill sleeves. The mold steel guide drill sleeve is and </p> <p>3-6MM hinge offset: suitable for 3mm\/4mm\/5mm\/6mm hinge offset</p> <p>Easy to install and use: First, adjust the drilling depth with a small wrench and lock the limit ring. Lock the fixture and start drilling</p> <p>Please note: the physical slightly color difference or difference, does not affect the use, please do not mind, thank you!</p> <p>Colour:Red</p> <p>Material:Aluminum alloy</p> <p>Type: B: Hinge punch kit</p> <p>Package Contents:</p> <p>1x Hole Puncher set</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>