Compatible with: The waterproof and non-waterproof SMD 5050/5630 single color LED strip lights. Not for SMD3528 LED strip lights.Function: Connect between two 5050/5630 single color LED strips to contour/bend around an angle, curve, corner or gap, making the connection look natural and beautiful.Easy Installation: No need to solder. Just snap your LED strip into this connector to connect.Flexible and Durable: These connectors are flexible and durable enough to be bent or twisted at any angle without breaking.Inner 10pcs.Installation Instructions:1.Make sure your LED strip is 10mm wide and has 2 contacts (+ and -) .2. Open the white clasp of the connector3.If you are using non-waterproof LED strip (without silicon on the led strip surface), just insert the LED light strip into the clasp of this cable connector, under the pins. Be sure to match the + and - on the LED strip with the + and - on the connector.If you are using a waterproof LED strip (with silicon on the surface of the led strip), you need to peel off the silicon on the surface around the solder/cut area first, then insert the LED light strip into the clasp, with the 2 contacts on the led strip under the 2 pins in the connector. Make sure to match the + and - on the strip with the + and - on the connector.4. Close the connector.5.Guy pull the LED light strip to confirm you have made a solid connection.Additional feature:If you need to wire your strip to a dimmer or power supply which comes with the DC12V (+ and -) connectors, you can cut a connector to solder this cable to your dimmer or power supply.Important note:< /p> If the connection is loose, the lights blink or don't light up. To ensure a good connection and good electrical conductivity, follow this tip:After inserting the LED strip into the connector, before closing the connector cap, lightly pull and press the LED strip to adjust the connection point until the LEDs light up. If the LEDs do not light up, use your finger to press the 2 metal contacts of the connector a little, until the LEDs light up.Package includes:10x 10mm Wide SMD 5050/5630 LED Strip 2 Pin Jumper Cablelucky meetNote: The data is manual measurement, please allow 1-28cm error, due to differences between light and screen, there will be a certain color difference, the specific received in kind prevail.