OfficialParts Specialist Since 2016 Trusted by 120,4046+ European drivers, explore our certified accessories collection directly from the seller profile. Waterproof 12V Universal Motorcycle 22mm Electric Hot Heated Grips Motorbike Hand Warmers Adjust Temperature Handlebar Feature: 1. One-piece molding to prevent rain and dust from entering the internal parts to corrode the parts, and the service life is longer and safer. 2. Built-in intelligent temperature control chip, three-speed adjustable temperature, safer. It is made of aluminum alloy, which is more durable and beautiful in appearance. 3. The design can be sealed and can be pierced. It does not affect the installation of the handle outside the handle, and only the lights and other decorative accessories are installed, which is more convenient. Specification: Product name: Intelligent three-speed ATV thermostat electric heating handle Product color: Black Product material: Nitrile Product net weight: 252g Product gross weight: 305g Packing size: 20.5*13.5*6cm Packing method: Carton Suitable for handlebar diameter: 22mm Input voltage: DC12V Product power: Red light 35W, blue light 25W, green light 17W Handle temperature: Low temperature 40C, medium temperature 50C, high temperature 60C Handle type: Sealable and openable electric handle Switch type: Multi-stage adjustable temperature control switch Applicable models: 12V ATV (ATV) with a handlebar diameter of 22mm Instructions: 1. Power on: the red light/blue light/green light flashes once and then goes out. 2. Working status: indicator light is always on (high-end: red light is always on, mid-range: blue light is always on, low-end, green light is always on). 3. Long press the power button for 3 seconds: shut down. 4. Click the power button: switch gears. How to use the switch: Press and hold for 3 seconds to turn on, the red breathing light will turn on, when it reaches a certain temperature, it will automatically turn blue; press lightly to change to blue light, the temperature is medium temperature; press twice to change to green, the temperature is the lowest; press three times to Red, high temperature. Long press for 3 seconds to turn off. Installation method: 1. Remove the original handlebar. 2. The inner hole of the left handle is moistened with soapy water, and the twisting amplitude should not be too large during installation. 3. The power cord, the red wire is connected to the positive pole, and the black wire is connected to the negative pole, please confirm and then connect it, do not reverse the connection. Precautions: When installing the left handle, do not twist the handle too much. Excessive twisting will cause the heating wire to shift. Tip: When wiring, connect red to the positive pole and black to the negative pole. If it is connected reversely, the switch will burn, but the handle will heat up, so when wiring, please make sure to connect the positive and negative terminals to prevent burning. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement.