Toilet Sticker Tape, Self-Adhesive Sealing Strip, White Protector for Kitchen Bathroom Shower Floor and Wall Specification: Condition: Item Type: Gaps Strip Material: PE + Butyl Rubber Color: White Using Temperature: -40 degrees Celsius -100 degrees Celsius Width: Approx. 2.2cm / 0.9in Length: Approx. 3.35m / 11ft Weight: Approx. 149g / 5.3oz Package List: 1 x Gaps Strip 1 x User Manual Note: 1. the parts to be sealed firstly and keep them dry; 2. Before use, firstly measure the length dimension of the required sealing part accurately; 3. Take out the product, measure the same length of the waterproof strip and the sealed part again and cut it; 4. Firstly peel off the 5cm length of the adhesive tape on the back of the product and fold it to 90, and then fix the waterproof strip on the to be pasted; continue to peel the adhesive tape until all installations are completed; 5. When the product is pasted at a 90 turn, cut each side of the joint into a 45 mating interface. 6. The temperature range of the installation room is preferably around 25 degrees Celsius , if the temperature is too low, the adhesive can be pasted after heating the adhesive with a hair dryer; 7. After the product is pasted, it will be pressed hard to make it stick more firmly; 8. After the product is pasted, do not mix with water within 24 hours and keep it dry.