1、Excellent Material: Made of high temperature resistant materials, durable and corrosion resistant, providing a safe and comfortable grip. 2、Non Slip: The handlebar surface is textured, non slip, and provide you a safe driving experience. 3、Heated Design: Fast heating design, provides a comfortable riding experience during the cold winter, say good bye to freezing hands. 4、5 Gears: With 5 gear adjustment switch, the temperature can be adjustes at will, warm your hands in winter. 5、Safe To Use: Allowing users to change temperature without taking their hands off the handle for a safer ride. Item Type: Motorcycle Heated Grip Material: ABS, TPV Color: Black Processing Temperature: 50-70℃ Power: 15-35W Suitable: For 22mm / 0.87in motorcycle handlebar 1. Pour the cleaning agent or lubricating oil into the middle of the handle and handle cover, and shake the handle cover back and forth to pull out the handle cover for future use. If no longer needed, you can use a knife to cut and remove the handle cover. Remove the metal handles according to their respective methods. 2. Pull out the throttle cable from the throttle core before replacing the throttle core in the accessories. If the cable is too hard, it may be dangerous, you can pull it out after loosening the cable. 3. Loosen the pull wire inside the throttle core. If the throttle core is replaced, adjust the tightness of the pull wire to an appropriate tightness. During adjustment, confirm whether the throttle valve can operate smoothly. 4. Apply adhesive on the handle. If the adhesive is too thick, it may overbrim and cause stains. Please use cardboard or scraper to spread the adhesive thinly, and then insert the handle sleeve, there is a hexagonal screw on the side of the controller, be sure to loosen the screw before inserting it, and then tighten it. Connection mode: red to positive pole, black to negative pole 1 x Pair of Heated Grips 1 x Power Cord