Since its launch, the GOKU GN745 AIO has stood as Flywoo's top-tier AIO product, earning widespread acclaim from Betaflight, INAV, and Ardupilot enthusiasts. Now, we're excited to introduce the latest upgrade in this series鈥攖he V3 version The V3 boasts a new ESC two-in-one drive solution, enhancing the continuous current capacity to 45A and improving the overcurrent protection capability of the motor pads, resulting in a more powerful overall performance. Furthermore, the V3 version significantly advances in terms of convenience, featuring 4 new direct-plug Uart ports and adopting a Type-C interface for easier connectivity. Highlights锛?/b> 1.Performance: Utilizes STM32F745 chip, BLHELI_32 firmware, and MPU6000 gyro, with dual BEC, barometer, black box, supports 7 serial ports and I2C. 2.Plug & Play: Compatible with DJI O3 air unit, GPS, Camera, Analog VTX, and Receiver without the need for soldering. 3.Type-C Interface: Features a Type-C interface for improved compatibility and easier connection. 4.Compatibility: Supports BF, INAV, and Ardupilot platforms. 5.New Layout: New ESC two-in-one drive solution, with a continuous current up to 45A. 6.Better Protection: Larger motor pad area with improved overcurrent protection. Specifications锛?/b> Brand: Flywoo Model: GOKU GN745 AIO BF Flight Controller Firmware: FLYWOOF745 INAV Firmware: FLYWOOF745 Ardupilot Firmware: FLYWOOF745 MCU: STM32F745 32-bit processor,216MHz, 1MB Flash IMU: MPU6000 (SPI) Barometer: SPL06 USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART) 7 hardware UARTS (UART1,2,3,4,5,6,7) Supports serial receivers (SBUS, iBus, Spektrum, CRSF) only. PPM and PWM receivers are not supported. Onbord 8Mbytes for Blackbox logging 5V Power Out: 2.0A max 3.3V Power Out: 0.5A max Dimensions: 33.5x33.5mm Mounting Holes: Standard 25.5/26.5mm square to center of holes Weight: 9.4g Onboard 4in1 ESC Support BLheli / BLHELI_32 Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600,Dshot1200 Input Voltage: 2-6S Lipo Continuous Current: 45A Firmware: GOKU_F4A32_PRO Package List 1x GOKU GN745 AIO Flight Controller 1x Capacitor 25V 470UF 4x M2x6.6 Shock-Absoring Ball 4x M2 Rubber Ring 1x XT30 Power Cable 1x Connection Cable for DJI O3 1x VTX & Camera Connection Cable 1x Receiver Connection Cable 1x GPS Compass Connection Cable